Microbeam X-Ray Absorption Near-Edge Spectroscopy of Alloying Elements in the Oxide Layers of Irradiated Zircaloy-2

Microbeam X-Ray Absorption Near-Edge Spectroscopy of Alloying Elements in the Oxide Layers of Irradiated Zircaloy-2
Author: Aditya P. Shivprasad
Publisher:
Total Pages: 31
Release: 2018
Genre: Zirconium alloys
ISBN:

Download Microbeam X-Ray Absorption Near-Edge Spectroscopy of Alloying Elements in the Oxide Layers of Irradiated Zircaloy-2 Book in PDF, Epub and Kindle

Hydrogen pickup of zirconium-based fuel cladding and structural materials during in-reactor corrosion can degrade fuel components because the ingress of hydrogen can lead to the formation of brittle hydrides. In the boiling water reactor (BWR) environment, Zircaloy-2 fuel cladding and structural components such as water rods and channels can experience accelerated hydrogen pickup, whereas Zircaloy-4 components exposed to similar conditions do not. Because the principal difference between the two alloys is that Zircaloy-2 contains nickel, accelerated hydrogen pickup has been hypothesized to result from the presence of nickel. However, an understanding of the mechanism by which this acceleration occurs is still lacking. We investigated the link between hydrogen pickup and the oxidation behavior of alloying elements when incorporated into the oxide layers formed on zirconium alloys when corroded in the reactor. Synchrotron radiation microbeam X-ray absorption near-edge spectroscopy (XANES) at the Advanced Photon Source was performed on carefully selected BWR-corroded Zircaloy-2 water rods at an assembly-averaged burnup ranging from 32.8 to 74.6 GWd/MTU to determine the oxidation states of alloying elements, such as iron and nickel, within the oxide layers as a function of distance from the oxide-metal interface at high burnup. Samples were chosen for comparison based on having similar oxide thicknesses, processing, elevation, reactors, and fluences but different hydrogen pickup fractions. Examinations of the oxide layers formed on these samples showed that (1) the oxidation states of these alloying elements changed with distance from the oxide-metal interface, (2) these elements exhibited delayed oxidation relative to the host zirconium, and (3) nickel in Zircaloy-2 remained metallic in the oxide layer at a longer distance from the oxide-metal interface than iron. An analysis of these results showed an apparent correlation between the delayed oxidation of nickel and higher hydrogen pickup of Zircaloy-2 at high burnup.


Microbeam X-Ray Absorption Near-Edge Spectroscopy of Alloying Elements in the Oxide Layers of Irradiated Zircaloy-2
Language: en
Pages: 31
Authors: Aditya P. Shivprasad
Categories: Zirconium alloys
Type: BOOK - Published: 2018 - Publisher:

GET EBOOK

Hydrogen pickup of zirconium-based fuel cladding and structural materials during in-reactor corrosion can degrade fuel components because the ingress of hydroge
The Role of Nickel in Hydrogen Pick-up During In-reactor Corrosion of Zirconium Alloys
Language: en
Pages:
Authors: Aditya Shivprasad
Categories:
Type: BOOK - Published: 2017 - Publisher:

GET EBOOK

Hydrogen pick-up of zirconium-based fuel cladding and structural materials duringin-reactor corrosion can degrade fuel component performance in existing light w
X-ray Diffraction Studies on Zirconium and Zircaloy-2
Language: en
Pages: 48
Authors: Myra S. Feldman
Categories: X-rays
Type: BOOK - Published: 1961 - Publisher:

GET EBOOK

Microprobe Study of Zircaloy Corrosion Films
Language: en
Pages: 48
Authors: Kurt F. J. Heinrich
Categories: Electron probe microanalysis
Type: BOOK - Published: 1964 - Publisher:

GET EBOOK

Mechanical Properties of Irradiated Zirconium, Zircaloy, and Aluminum
Language: en
Pages: 112
Authors: Richard E. Schreiber
Categories: Aluminum alloys
Type: BOOK - Published: 1961 - Publisher:

GET EBOOK